KEMET
Product Lines

Aluminum electrolytics offer some of the smallest sizes for a given capacitance and voltage. Commonly used for filtering and bulk energy storage, electrolytics are available in rated voltages exceeding 500 VDC. KEMET Electrolytic capacitors are utilized in a wide variety of demanding power electronics applications such as automotive, power generators and converters, welders, wind turbines, uninterruptible power supplies, and medical imaging.

The phenomenon of surface arcing is caused by a high voltage gradient between the two termination surfaces or between one of the termination surfaces and the counter internal electrode structure within the ceramic body.

The KEMET AC line filters are offered in Toroidal designs with a wide variety of sizes and specifications available at TTI.

The KEMET AC line filters are offered in an SU type for a wide variety of applications and specifications.

AC Line Filters - Rectangular AC line filters are offered in a wide variety of sizes and specifications.

KEMET EMI capacitors offer small size and a wide capacitance range. Worldwide X & Y approvals.

Open Mode Ceramic Capacitor from KEMET are designed to significantly minimize the probability of a low IR or short circuit condition when forced to failure in a board flex situation. This reduces the potential for causing catastrophic failures.

High Voltage Ceramic KEMET Capacitors are designed to withstand the highest voltage applications. They offer high capacitance with low leakage current and low ESR at high frequency.

Tip N Ring KEMET MLCC capacitors are designed and rated for telecommunication ringer circuits where the capacitor is used to block -48 to -52 Volt DC of line voltage and pass a 16-25 Hz AC signal pulse of 70 Vrms to 90 Vrms.

Tin/Lead termination KEMET capacitors are designed to meet the needs of the commercial, high reliability and military customer applications where Tin/Lead plating is required.

KEMET COTS MLCC surface mount capacitors are available in standard EIA case sizes from 0402 to 2225 and standard capacitance values in X7R and C0G dielectrics. Voltage ratings range from 6.3V to 200V.

Chip Array Capacitors from Kemet are actually four individual capacitors inside one 1206 monolithic structure that saves board space and is RoHS Compliant.

KEMET's RoHS compliant Ceramic Surface Mount (SMT) Capacitors are formulated ceramic dielectric materials which have been fabricated into thin layers, interspersed with metal electrodes alternately exposed on opposite edges of the laminate. The entire structure is then fired at a high temperature to produce a monolithic block that provides high capacitance values in a small physical volume.

Polypropylene metallized film with rectangular plastic box type filled with resin and 2 or 4 tinned copper wires.

The C44U Series is a polypropylene segmented metallized film with cylindrical aluminum can type filled with resin, screw terminals and plastic deck.

The capacitors of C4D Series are designed with reinforced metallized polypropylene dielectric film.

The Super Capacitor is the most outstanding capacitor concept to appear in the past decade.

Aximax, KEMET's Ceramic Thru-Hole Conformally Coated Axial Capacitor is avaliable in five different case sizes with three choices of dielectrics.

FC Series Supercapacitors, also known as Electric Double- Layer Capacitors (EDLCs), are surface mount type components intended for high energy storage applications.

TTI Inc. has the KEMET Electrolytic Capacitor Screw Terminals (ALS30/31 Series); which covers a wide range of voltage ratings & long life performance.