TT Electronics
产品线

Dual Winding Inductors from BI Technologies is available from TTI, Inc.

Overview of Semelab's BeO Free Packaging Technology

These Hall-effect devices contain a monolithic integrated circuit which incorporates a Hall element, a linear amplifier, a threshold amplifier, and Schmitt trigger on a single Hallogic® silicon chip. Included on-chip is a band gap voltage regulator to allow operation with a wide range of supply voltages.

Each ratiometric linear Hall-effect sensor contains a monolithic integrated circuit on a single chip. This circuit incorporates a quadratic Hall sensing element, which minimizes the effects of mechanical and thermal stress on the Hall element and temperature compensating circuitry to compensate for the inherent Hall element sensitivity change over temperature current.

The OHB900 consists of a Hall-effect sensor similar to the OH180U and a rare earth magnet mounted in a low-cost plastic housing. The magnet produces optimum magnetic flux at the Hall-effect sensor location.

The OHB3040 consists of a ceramic Hall-effect sensor (OMH3040) and a rare earth magnet mounted in a low-cost plastic housing. The magnet produces optimum magnetic flux at the Hall-effect sensor location.

The OCB100 series OPTEK Circuit Boards are configured to optimize the design effort needed to use a reflective or interruptive device.

The OVSTRGBB1CR8 package design provides wide viewing angle, low power consumption, and high luminous intensity.

The OVSPRGBCR4 is an energy-efficient packaged LED source that offers high luminance, and a long operating lifespan.

TT Electronics OVS5MxBCR4 Series LED package features high lumen output in a package measuring just 3.5 x 3.5 x 1.2mm. It is compatible with IR reflow soldering, the half-watt LED package also features low thermal resistance and exceptional spatial uniformity.

The OPA779 Series emits a uniform consistent white lighting pattern within its length providing exceptional lighting for retail displays, refrigeration, and general lighting while reducing energy consumption as compared to traditional lighting systems.

TT Electronics OPB810W Series Wide Gap Slotted Optical Switch is a remote mounted [24” (610 mm) 26 AWG wire] wide gap switch provides the flexibility of a custom device from a standard product line.

The OVSRRGBCC3 is a compact full-color (RGB) in a miniature surface mount package with a 150° viewing angle.

OARS Current Sendsing Resistors from IRC are welded, flameproof resistors distributed by TTI, Inc.

Enhanced Voltage Dividers from IRC are available from TTI, Inc.

TTI carries TMC Series Thick Film Resistors from IRC. Providing design engineers with a complete range of military-qualified, DSCC-approved components, TT electronics IRC has extended the qualified resistance range of its thick film MIL-PRF-55342 R level resistors. The TMC Series resistors are now qualified from 1Ω to 10MΩ for the 1206 style; and 1Ω to 15MΩ for the 2010 and 2512 package sizes.

TT electronics IRC division has developed an 0402 chip resistor to expand its comprehensive offering of precision thin film chip resistors. Designated the PFC series, the chip resistors are constructed on IRC’s ultra stable patented Tantalum Nitride (TaNFilm™) thin film resistive element for proven long life and high stability in harsh environments.

TTI Inc. Low Range 3 Watt Mil Chip Resistors from IRC. IRC’s LRF3W-MIL series combines high power capabilities, small chip size, very low resistance.

The OARS-XP Series resistors consist of a 0.25” wide metal element resistance alloy, welded to compliant copper terminals designed to handle TCE (thermal coefficient of expansion) mismatch between the device and the PC board.

Overview of IRC's Thin Film Mil-Qualified Precision Chip Resistors