Spectrum Control
产品线

API Technologies' Spectrum Control Brand Products will address virtually any requirement for a military/custom power product.

API Technologies' Spectrum Control Brand Products Power Entry EMI-Filtering Modules

This filter series is non-polar and surface mountable with excellent performance characteristics and come in either a Feed-thru or Pi circuit configuration.

The PSM & SSM series filter are the first surface mount components to effectively filter EMI/RFI on printed circuit boards operating at currents up to 20A.

To achieve high frequency filter performance, power surface mount (PSM) filters were designed to accommodate an RF shield that would attach to both the filter and board ground planes.

The economical High Frequency PCB Filter offers electrical characteristics which allow many devices to meet most government and industry specifications for EMI control, while providing good electrostatic discharge protection.

Offers high insertion loss in a wide frequency band by combining feed through capacitors, multilayer ceramic capacitors and ferrite bead inductors with high self resonance frequency.

This series of filters features hermetic glass seals and high EMI filtering performance. They are excellent for critical applications that demand high reliability in the toughest environmental conditions and provide broadband high performance EMI filtering from 10 KHz to over 10 GHz.

API Technologies is pleased to announce its 9900 series EMI/RFI, which is a low pass filter. The filter can be traditionally soldered in or can be installed without soldering.

API Technologies’ Spectrum Control Miniature Hermetic L Circuit Solder-in EMI Filters Improve Insertion Loss.

These filters are ideal for microwave applications such as attenuators and oscillators, and perform well in high impedance circuits where large capacitance values are not practical.

API Technologies is pleased to introduce its line-up of resin seal EMI filters. These filters come in a variety of styles, meet military specification MIL-PRF-15733, and serve a variety of applications

These filters are easily mounted in a tapped hole or thru-hole with supplied nut and lock-washer. The rugged case with resin seals at both ends provides excellent environmental protection. Primarily used in filtering signal/data lines and DC power lines.

Solder-in filters are ideal for use in critical areas where space does not allow use of mounting tools or hardware.

Spectrum Advanced Specialty Products introduces the new space saving #2-56 threaded miniature EMI spanner filter. This new threaded filter is designed without a hex and does not require soldering for installation.

High current filters are ideal for use in high current 5 volt logic buss, but also can be used for ±48 VDC telephone rack buss, high current switch mode power supplies and DC charging systems.

Spectrum introduces the new space saving #2-56 threaded miniature EMI spanner filter. This new threaded filter is designed without a hex and does not require soldering for installation.

The Series 500 are cost effective, highly reliable EMI filtered D-Subminiature connectors that feature a .318" footprint for 90 degreee PCB connectors and a low profile housing on straight PCB connectors.

Spectrum Control 312 Series of pre-filtered GPS LNA modules is designed to amplify GPS signals while protecting the front end of the GPS receiver.

Spectrum Control offers a standard line of Rotary Joints, formerly manufactured by Sage Labs, suitable for use in commercial and military applications.