-
External LTE Antennas
External antennas are connected outside the product but not exposed to outdoor weather conditions. The antenna is connected directly to the product with a RF connector or remotely via a cable. -
Internal FPC Dual-Band WiFi Antenna
The W3315Bxxx antennas are internal Flexible Printed Circuit Dual Band WiFi antennas that cover the entire WLAN bands of 2.4 - 2.5 GHz and 4.9 – 5.85 GHz. -
Internal LTE Antennas
Internal antennas are connected to the product PCB as an SMD component or via a cable and a miniature connector. The antenna is placed inside the product enclosure so it´s not visible by the end user. Pulse´s expertise in the mobile phone industry allows the development of high performance standard antennas as well as extensive custom capability. -
Isolation Power Transformers (SMD)
PH9385NL is a series of high isolation power supply transformer drivers. Intended to operate in a fixed duty cycle Push Pull topology, it is a part of a low cost solution for delivering lower power (up to 2.5W) from a low voltage source. -
Magnetic Mount Accessory for Panther Series Antennas
The GPSMBMM is the ideal magnetic mount accessory to be used in conjunction with the GPSMB Panther Series Antennas. -
Navigation Solutions
Pulse Navigation Solutions are for use in devices which provide location information by tracking satellites. This includes satellites using GPS L1 Band 1.575 GHz and Glonass 1.598-1.606 GHz. -
Outdoor Omni Directional Antenna
This omni directional antenna operates in the frequency ranges of 430-440 MHz and 860-930 MHz. -
Outdoor LTE Antennas
Pulse outdoor antennas are wind rated to 100 MPH, are IP (Ingress Protection) rated at 65, 67, 68 and are constructed of UV resistant materials. -
WLAN Antenna Solutions
WLAN antenna solutions for IEEE802.11 (a, b, g, n) providing single and multiple frequency solutions for 2.4, 4.9, 5 and 5.8 GHz. Antennas optimized for MIMO applications are also a feature of the Pulse range and technical capabilities. -
Industrial Automation, Process Control and Communications
Pulse Electronics offers full line of RJ45 integrated connectors with magnetic (ICM) supporting both 100BASE-TX and 1000BASE-T for industrial applications. -
Power Transformers for PoE Applications
The Pulse PoE Series is a series of high-efficiency, small footprint, off-the-shelf power transformers for powered device (PD) PoE products that meet the IEEE standard 802.3af. -
High Isolation Gate Drive Transformers (PH9400)
Meet the new PH9400 series: Pulse Electronics Power BU's first ever surface mount (SMT), high isolation gate drive transformers. -
USB 3.1 Type C Connectors
Compact connector delivering speeds up to 10 Gbps and power up to 100 Watts. -
Automotive Grade Current Sense Transformer
Pulse's PA1005.XXXQNL Current Sense Transformer series is the first Magnetic product to achieve AEC-Q200 qualification. -
Low Voltage Differential Signaling (LVDS) (3Gbps)
Pulse Electronics Low Voltage Differential Signaling (LVDS) (3Gbps) is available at TTI. -
Automotive Audio Bus (A2B) (50Mbps)
Pulse Electronics Automotive Audio Bus (A2B) (50Mbps) is available at TTI. -
Ethernet Audio Video Bridging (AVB) (100/1000Mbps)
Pulse Electronics Ethernet Audio Video Bridging (AVB) (100/1000Mbps) is available at TTI. -
Battery Management System
Pulse Electronics Battery Management System supports major BMS isolation and EMI solutions, and serial Daisy Chain isoSPI, SPI and other signal isolation. Meets AEC-Q200 requirements for automotive applications. -
FlexRay (10Mbps)
Pulse Electronics FlexRay (10Mbps) is available at TTI. -
Control Area Network (CAN) Bus (1Mbps)
Pulse Electronics Control Area Network (CAN) Bus (1Mbps) is available at TTI.