|
 DIP 1500V Load
DIP6-pin type with low on-resistance and high cost-performance.
(Datasheet)
(Part Builder)
|
|
DIP Form A
6-pin type for switching low-level analog signal. PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. Unlike mechanical relays, the PhotoMOS relay combines LED and optoelectronic device to transfer signals using light for extremely high isolation.
(Datasheet)
(Part Builder)
|
|
DIP Form A Reinforced Insulation
High cost-performance DIP6-pin type, reinforced insulation available. PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion.
(Datasheet)
(Part Builder)
|
|
DIP Form B
Normally closed 6-pin type of 400V load voltage. This has been achieved thanks to the built-in MOSFET processed by our proprietary method, DSD (Double-diffused and Selective Doping) method. PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion.
(Datasheet)
(Part Builder)
|
|
 DIP Form B Reinforced Insulation
Normally closed DIP6-pin economic type with reinforced insulation. This has been realized thanks to the built-in MOSFET processed by our proprietary method, DSD (Double-diffused and Selective Doping) method. PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. Can control max. 0.55 A load current with 5 mA input current. Low on-resistance of typ. 1Ω (AQV412EH). More than 0.4 mm internal insulation distance between inputs and outputs. Conforms to EN41003, EN60950 (reinforced insulation).
(Datasheet)
(Part Builder)
|
|
DIP High Capacity
DIP6-pin type with high capacity of 2.5A load current.
(Datasheet)
(Part Builder)
|
|
 DIP Low Level Analog Signals
DIP6-pin type with wide variation Low on-resistance. PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion.
(Datasheet)
(Part Builder)
|
|
DIP Low on Resistance
DIP6-pin type featuring low on-resistance with 200V/400V load voltage. The capacitance between output terminals is small; typ. 10pF. This enables a fast operation speed of typ. 0.2ms. Max. 0.1 A of load current can be controlled with input current of 5 mA. The on resistance is less than our conventional models.
(Datasheet)
(Part Builder)
|
|
DIP Low Output Capacitance
DIP6-pin type suited for radio frequent switching. Low output capacitance: typ. 4.8 pF Isolation loss: 40 dB or more (at 1 MHz) (AQV225). PhotoMOS relay features extremely low closed-circuit offset voltages to enable control of small analog signals without distortion.
(Datasheet)
(Part Builder)
|
|
DIP Low Power Consumption
DIP6-pin type featuring high sensitivity. PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion.
(Datasheet)
(Part Builder)
|
|
DIP Short Circuit Protection
Short circuit protection (Non-latch type) only for DC load. The short circuit protection function prevents the continued flow of short current. After short current is detected, load current is monitored, and if the load returns to normal, the relay returns to normal operation. The built-in short circuit protection function eliminates the need for overcurrent protectors, reducing mounting costs and space requirements.
(Datasheet)
(Part Builder)
|
|
DIP Wide Range Load Voltage
Normally closed DIP6-pin type Low on-resistance with 250V/400V load voltage. PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. Can control max. 0.2 A load current with 5 mA input current. Low on-resistance of typ. 5.5 Ω (AQV453). More than 0.4 mm .016 inch internal insulation distance between inputs and outputs. Conforms to IEC950 (reinforced insulation).
(Datasheet)
(Part Builder)
|
|
RF DIP Form A with 80V
DIP6-pin type suited for radio frequent switching. Low output capacitance: typ. 4.8 pF Isolation loss: 40 dB or more (at 1 MHz) (AQV225). Turn on time: typ. 0.1 ms Turn off time: typ. 0.03 ms. PhotoMOS relay features extremely low closed-circuit offset voltages to enable control of small analog signals without distortion.
(Datasheet)
(Part Builder)
|
|
 SOP Form A
Miniature SOP6-pin type of 60 to 400V load voltage. PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. The device comes in a miniature SOP measuring (W)4.4 × (L) 6.3 × (H)2.1 mm (W).173? × (L).248? × (H).083 inch approx. 25% of the volume and 50% of the footprint size of DIP type.
(Datasheet)
(Part Builder)
|
|
SOP Form B
Normally closed SOP6-pin type of 400V load voltage. The device comes in a small SOP measuring (W) 4.4 × (L) 6.3 ×(H) 2.1 mm (W) .173× (L) .248×(H) .083 inch approx. 25% of the volume and 50% of the footprint size of DIP type. This has been achieved thanks to the built-in MOSFET processed by our proprietary method, DSD (Double- Diffused and Selective Doping) method. PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion.
(Datasheet)
(Part Builder)
|
|
SOP High Capacity
Miniature SOP6-pin type with high capacity of 1.25A load current.
(Datasheet)
(Part Builder)
|
|
SOP Low On Resistance
Miniature SOP6-pin type featuring low on-resistance with 200V/400V load voltage. The capacitance between output terminals is small; typ. 10pF. This enables a fast operation speed of typ. 0.1ms (AQY224NS).
(Datasheet)
(Part Builder)
|
APV DIP MOSFET Driver