Knowles 
产品线

Knowles Capacitors AEC-Q200 Multilayer Ceramic Capacitors (MLCC) are suitable for harsh automotive environments. AEC-Q200 MLCC specifications, datasheets, buying information, and inventory are available at TTI.

Knowles Syfer StackiCap MLCC Capacitors are designed to provide high Control Voltage (CV) in compact packages and offer the greatest volumetric efficiency in high-voltage X7R ceramic capacitors. Now available at TTI. Browse inventory, view datasheets, and more.

The Syfer E01 and E07 ranges of feedthrough MLCC chip ‘C’ filters are 3 terminal chip devices designed to offer reduced inductance compared to conventional MLCCs when used in signal line filtering.

The Ultra-low ESR range offers a very stable, High Q material system that provides excellent, low loss performance in systems below 3GHz.

The X8R dielectric will operate from -55°C to +150°C,with a maximum capacitance change ±15% (without applied voltage). The devices are available in sizes 0805 to 2225, with voltage ranges from 25V to 3kV and capacitance values from 270pF to 1.8μF.

A range of dc rated multi-layer chip capacitors from 0.47pF to 22μF and in case sizes 0603 to 8060 in C0G/NP0 and X7R dielectrics.

Novacap is now available at TTI. Browse inventory, view datasheets, and more.

Knowles Dielectric Laboratories now available at TTI. Browse inventory, view datasheets, and more.

The PSL range of multilayer ceramic capacitors is suitable for a variety of applications including: commercial (such as power supplies, DC-DC converters, LED lighting), military, industrial, automotive and aerospace

Knowles Capacitors AEC-Q200 MLCC Capacitors are high reliability MLCCs for use in critical or high reliability environments. All fully tested/approved and available with a range of suitable termination options, including tin/lead plating and Syfer FlexiCap™.

The Knowles SBSG range has a 5A current rating for the Pi type, and 10A rating for the C type. Suitable for pick-and-place, these miniature surface mount filters offer assembly savings compared with conventional panel mounted filters.

The SBSM range of surface mount EMI filters has been designed for use on pcbs, and is suitable for both signal and power lines.

With a size of only 1206, the SBSP range of surface mount pi-filters offers an unbeatable combination of size and performance.

Knowles SFSU feed-through EMI filters are designed for soldering direct to a chassis or panel, and are suitable for hole diameters of 5.8mm (0.228").

The Syfer X2Y E03 Integrated Passive Component is a 3 terminal EMI chip device. When used in balanced line applications, the revolutionary design provides simultaneous line-toline and line-to-ground filtering, using a single ceramic chip.