DEUTSCH ICT (TE Connectivity) DEUTSCH DT Series Environmentally Sealed Connectors

DEUTSCH DT, DTM, and DTP series environmentally sealed connectors are designed for cable to cable and cable to board applications. The DT connectors are used in harsh environment applications where even a small degradation in connection may be critical. Thermoplastic housings offer a wide operating temperature range and silicone rear wire and interface seals allow the connectors to withstand conditions of extreme temperature and moisture.The DEUTSCH DT series general purpose connectors will provide reliability and performance on the engine or transmission, under the hood, on the chassis, or in the cab.

Series	Description	Features
DT Series	DEUTSCH DT series connectors offer field proven reliability and rugged quality. The DT design strengths include optional flange mounting, multi-pin arrangements, and design flexibility. The DT series offers the designer the ability to use multiple size 16 contacts, each with 13 amp continuous capacity, within a single shell.	Accepts contact size 16 (13 amps) 14-20 AWG (2.50-0.50 mm2) 2, 3, 4, 6, 8, and 12 cavity arrangements In-line, flange, or PCB mount Rectangular, thermoplastic housing Integrated latch for mating Wedgelocks confirm contact alignment and retention
	DEUTSCH DT Housings are available in 2, 3, 4, 6, 8, and 12 pin counts and use size 16 DEUTSCH contacts, each with 13-amp continuous capacity. The housings feature an integrated latch for mating.
	DEUTSCH DT Headers are printed circuit board connectors available in 2, 3, 4, 6, 8, and 12 cavity arrangements. They are available in straight, right angle, flanged and flangeless configurations. All versions utilize and accept the DEUTSCH size 16 contacts, rated for 13 amps each.
	DEUTSCH Printed Circuit Board enclosures are available with through hole mounting and optional venting. DEUTSCH DT and DTM snap-in headers are available in 12, 24, 36, or 48 configurations.
	DEUTSCH DT Wedgelocks help confirm proper contact alignment within each connector. Wedgelocks are required components for all DEUTSCH DT housings.
	DEUTSCH DT Detector Housings provide visual confirmation of power by producing a distinct glow. This 2-way plug features a transparent housing and a wedgelock with an integrated 12 or 24 volt LED option.
	DEUTSCH DT Backshells offer a high level of protection and allow convoluted tubing to nest within the rear of the backshell. Straight, 90°, and strain relief versions are available.
	The DT Dust Caps are designed to provide protection for the connector interface when the two halves are not mated. Plastisol or thermoplastic dust caps are available for several DEUTSCH DT connector configurations.
	Mounting Clips are installed on the receptacle to mount DEUTSCH DT connectors. The clips are available for several configurations and in plastic, stainless steel, or steel with zinc plating.
	DEUTSCH solid contacts terminate wire from 4 AWG to 22 AWG (25 - 0.35mm2) and are available in 5 sizes each of the pin and socket. They are available with either a nickel or gold plating finish.
	DEUTSCH stamped & formed style contacts terminate wire from 10 AWG to 22 AWG (6.0 - 0.35mm2). They are available in nickel, tin, or gold plating and in multiple sizes to accommodate a wide range of wire insulation.
DTHD Series	DEUTSCH DTHD connectors are single terminal connectors for heavy-duty applications. Easy to install, environmentally sealed and compact in size, these connectors offer a simple, field serviceable alternative to a splice. DEUTSCH DTHD connectors are available in three sizes, carry 25 to 100 amps, and can be mounted or used in-line. These connectors are also available with end cap and flange mount modifications, which can enhance design flexibility and help you meet application requirements.	Accepts contact sizes 4 (100 amps), 8 (60 amps), and 12 (25 amps) 6-14 AWG (16.00-2.00 mm2) 1 cavity arrangement In-line or flange mount Circular, thermoplastic housing Integrated latch for mating
DTM Series	DEUTSCH DTM series connectors offer solutions to your smaller wire gauge applications. Building on the DT design strengths, the DTM connector line was developed to fill the need for lower amperage, multipin connectors. The DTM series offers the designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell.	Accepts contact size 20 (7.5 amps) 14-22 AWG (2.50-0.35 mm2) 2, 3, 4, 6, 8, and 12 cavity arrangements In-line, flange, or PCB mount Rectangular, thermoplastic housing Integrated latch for mating Wedgelocks confirm contact alignment and retention Product specification document: 108-151010
DTMH Series	The DTMH series EE04 modification connectors are environmentally sealed, high temperature connectors capable of operating in temperatures -55°C to +150°C. They accept size 20 contacts and carry 7.5 amps each. The DTMH connectors are available in 2-4 cavity arrangements and feature an integrated TPA for easy assembly. The EE04 connectors are available in 6, 8, and 12 cavity arrangements and require a secondary wedgelock.
DTP Series	DEUTSCH DTP series connectors provide solutions for your power application requirements. Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin connectors. The DTP series offers the designer the ability to use multiple size 12 contacts, each with 25 amp continuous capacity, within a single shell. The DTP connectors are currently available in two and four pin configurations.	Accepts contact size 12 (25 amps) 10-14 AWG (6.00-2.00 mm2) 2 and 4 cavity arrangements In-line, flange, or PCB mount Rectangular, thermoplastic housing Integrated latch for mating Wedgelocks confirm contact alignment and retention
DTV Series	The DEUTSCH DTV series connectors offer the same time tested reliability and performance as the DT series, with the added flexibility of an 18 cavity flanged design.	Accepts contact size 16 (13 amps) 14-20 AWG (2.00-0.50 mm2) 18 cavity arrangements Flange mount Rectangular, thermoplastic housing Integrated latch for mating Wedgelocks confirm contact alignment and retention

Manage Cookie Settings

DEUTSCH ICT (TE Connectivity) DEUTSCH DT Series Environmentally Sealed Connectors