Panasonic PhotoMOS 8 Pin Relays

DIP 2 Form A
High cost-performance DIP8-pin type with reinforced insulation. More than 0.4 mm internal insulation distance between inputs and outputs. Con-forms to EN41003, EN60950 (reinforced insulation). PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. Can control max. 0.14 A load current with 5 mA input current. Fast operation speed of type. 0.5 m(AQW210EH).
(Datasheet)
(Part Builder)

DIP 2 Form A Low High Sensitivity
DIP8-pin type featuring low on-resistance with 400V load voltage. Can control max. 0.16 A load current with 5 mA input current. Low on-resistance of typ. 10.2Ω.
(Datasheet)
(Part Builder)

DIP 2 Form B Low On Resistance
Normally closed (2 Form A) DIP6-pin type Low on-resistance with 400V load voltage. Has been realized thanks to the built-in MOSFET processed by our proprietary method, DSD (Double-diffused and Selective Doping) method.(Datasheet)
(Part Builder)

DIP Form A and B
Both NO and NC contacts incorporated in a DIP8-pin package. Approx. 1/2 the space compared with the mounting of a set of 1 Form A and 1 Form B PhotoMOS relays. Applicable for 1 Form A 1 Form B use as well as two independent 1 Form A and 1 Form B use.
(Datasheet)
(Part Builder)

DIP Form A and B Reinforced Insulation
Both NO and NC contacts incorporated in a compact DIP8-pin Reinforced insulation. 60V type couples high capacity (0.5A) with low on-resistance (typ. 1Ω). More than 0.4 mm internal insulation distance between inputs and outputs. Conforms to EN41003, EN60950 (reinforced insulation).
(Datasheet)
(Part Builder)

RF SOP 2 Form A High Load Voltage
Miniature SOP8-pin type featuring low C×R with high load voltage of 250V. With high load voltage of 250V, low output capacitance and low onresistance. Output capacitance (Cout): 33 pF (typ.). On-resistance (Ron): 11Ω (typ.).
(Datasheet)
(Part Builder)

SOP Form A and B
Both NO and NC contacts incorporated in a small SOP8-pin package. Normally open and normally closed contacts in a SOP package. The device comes in a miniature SOP measuring (W) 4.4 × (L) 9.37 × (H) 2.1 mm (W) .173× (L) .369× (H) .083 inch - approx. 38% of the volume and 66% of the footprint size of DIP type.
(Datasheet)
(Part Builder)

SOP RF 2 Form A Low On Resistance
Miniature SOP8-pin type featuring low on-resistance with 200V load voltage. 2-channel (Form A) in SOP8-pin package miniature. (W) 4.4 × (L) 9.37 × (H) 2.1 mm (W) .173 × (L) .369 × (H) .083 inch -approx. 38% of the volume and 66% of the footprint size of DIP8-pin.
(Datasheet)
(Part Builder)