Amphenol
Product Lines

FCI has expanded its line of storage interface interconnects with the development of an eSATA input/output connector aimed at single-lane external storage applications with less than six feet of cable. Up to five times faster than existing external storage solutions like USB 2.0 and FireWire 400, the eSATA connector provides external data backup and protection at speeds up to 3 Gb/s and is ideal for applications such as desktop and notebook computers, set-top boxes, gaming equipment, external portable storage and USB-related equipment.

Amphenol Commercial FRJAE Modular Jacks product specifications, datasheets, buying information, and inventory are available at TTI.

High Speed Quadrax contacts consist of an outer contact with four inner contacts spaced to form two 100 or 150 Ohm controlled impedance differential pair. Both contacts, when used in Amphenol MIL-DTL-38999 Series III and ARINC type connectors, provide an excellent alternative for harsh environment applications such as: Ethernet 100 Base-T-100 Ohm, Gigabit Ethernet 1000 Base-T-100 Ohm, Fibre Channel-150 Ohm, IEEE1394B FireWire-110 Ohm.

Amphenol Commercial RJHSE Series Modular Jacks are RoHS compliant. View product specifications, datasheets, buying information, and inventory available at TTI.

The shielded triax contacts with three conductors are designed for use with triax cable. Amphenol supplies Triax contacts in sizes 8, 10 and 12 for use in MIL-DTL-38999 Series I and III connectors.

Split-Pair Quadrax Contacts & Cables from Amphenol Aerospace

Amphenol Connectors are ideally suited for the incorporation of shielded contacts for high performance interconnection applications. The circular family is built around MIL-DTL-38999 specifications, with Mil-approved and commercial styles offered. Normal operating voltage for circulars with power contacts only is up to 900 VAC (RMS) at sea level.

PC Tail shielded contacts provide a cost effective packag­ing solution for limited space applications where connec­tors are attached to printed circuit boards. High reliability is assured with factory pre-assembled contacts and stan­dardization termination to the board. PC Tail contacts are available for MIL-DTL-38999 Series I and III circular connectors and also for ARINC 404, ARINC 600 and R27 rect­angular connectors. Consult Amphenol Aerospace for further information on the applicable tooling for these contacts.

Amphenol and SV Microwave (an Amphenol company) offer DC to 40 GHz high frequency size 8, 12 and 16 coaxial contacts for the D38999 Series III housing and standard inserts. These contacts allow any application to continue to use the D38999 connector and be able to expand the use to include the microwave transmission lines.

The LMD Connector Series was designed by Amphenol Pyle-National to provide flexibility in the assembly of wire harnesses that are used in instrumentation and avionic control environments. The modular design of the LMD provides rack and panel or cable to cable attachment.

Amphenol’s Low Mating Force Connectors are well known in the connector arena – with proven performance on the ground, in the air, and at sea. – In service for over 25 years, with over 50 million brush contacts fielded; and qualified for use on M1A2 Abrams, F-16 Falcon, F/A-22 Raptor, F-35 Lightning II, AIM-132

Amphenol LRM Surface Mount Connectors meet the high density needs of today’s integrated electronic modules. Amphenol goes beyond the usual board level product offering. That's what you expect from a worldwide interconnect product leader.

The new (Rugged) R-SATA style connector is perfectly suited as the primary internal storage interconnect for desktop and mobile PCs, connecting the system to peripherals such as hard drives, solid state drives, optical drives, and removable magnetic media drives. The R-SATA supports SATA 3.0 protocol, delivering 6.25 Gb/s data rates & beyond. Amphenol’s R-SATA connector utilizes a Micro-Hyperboloid contact with proven performance. The Micro-Hyperboloid contact system offers low insertion and extraction forces, high durability counts and is resistant to shock, vibration and fretting corrosion.

MIL-PRF-29504 fiber optic termini are designed for use in size 16 legacy D38999 Series III and CF38999 connectors. CF38999 are the same as the standard D38999 connectors, except they hold tighter tolerances on shell keying and insert geometry. These termini offer high optical performance available in single and multi-mode.

Amphenol Sine Systems ATS Connector System is IP67 and IP69K rated. View product specifications, datasheets, buying information, and inventory available at TTI.

Amphenol provides 90°, size 16 fiber optic termini that can be used with multi-channel circular connectors. Consult Amphenol for the 90°, size 16 termini for use in LRM rectangular connectors. (Please consult Amphenol for availability of 90° size 20 termini).

Approved for use in JSF/F-35 application. Durability-1500 couplings minimum (in reference to connector couplings, not termini).

Designed for use in Amphenol MT38999 circular connectors and also for rectangular products: printed circuit board interconnects, LRM, VME64 and VITA46 interconnects.

Approved for use in JSF/F-35 applications. Based on Amphenol Composite Tri-Start, Qualified to MIL-DTL-38999.

Amphenol provides a large array of cable assemblies with high speed quadrax and differential twinax contacts, as well as coax and concentric twinax contacts.